| CN

Product introduction

Flyadd®-3 is an efficient nucleating agent for polyolefins used in homopolymer and copolymer polypropylene and LLDPE films, as well as super high molecular weight polyethylene. The results show that the haze is decreased from 37% to about 10% by adding 0.3% Flyadd®-3 in homopolymer polypropylene injection molded piece of 2mm thickness, and that of polypropylene random copolymer injection molded piece with the same thickness is decreased to about 6%. The haze in LLDPE films can be decreased not less than 87% by adding 0.2% Flyadd®-3. The recommended level is 0.1-0.35% in polypropylene transparent injection moldings, and is 0.1-0.2% in LLDPE .It can be employed in the form of masterbatch, and also in conjunction with white oil or other appropriate dispersant agents directly. The recommended processing temperature range is 250-270 ℃.



Appearance White Powder
Melting Range ℃ ≥250℃
Moisture (%) ≤0.5%
Purity ≥96%
Product consulting

86 20 38922082

86 20 38922027


Room 4006, tower B, sinopec building, 191 tiyu west road, guangzhou.

COPYRIGHT © Guangzhou bolong chemical co. LTD